Wall Mount Patch Panel Enclosures, Fiber Optical Distribution Case/Box/Cabinet

Features:

1)      Material: cold rolled steel

2) The body with electrostatic spraying surface, light structure and good-looking appearance

3) 19" or 23'' standard installation, adjustable in forward and backward directions

4) The panels can be clamped with 12/24/48 cores FC/SC/ST adaptors, which bevel the face side with 30 degrees，That not only ensures the curvature radius of fiber but also protects the eyes from highlight

5) Suitable for being installed in different kinds of racks or cabinets

6) Side door and upside door could be opened to arrange the fiber

7) Optical cables can be lead in/out from rightward or leftward

The Fiber Fusing Distribution Board of the unit box is double side structure, fully adopting the face and back side of the board. Suitable for ribbon or non-ribbon optical fiber cable.

Uses and properties:

The wiring connection device used in connecting optical cables and optical communication installations                                

Suitable for the protective connection between cables and pigtails       

Used for both single core and ribbon optical fiber cable,

Closure structure with excellent sealing performance

Adopting the splicing and distribution module for easy operations

Special fiber routing designs to ensure that the bending radii are over 40mm

Main Technical Indexes：

1.Environmental temperature：-25℃～+55℃                          

2.Relative humidity：＜85%(When the temperature is below 30℃)  

3.Atmospheric pressure：70～106KPa

4.Insulation resistance：≥2×10⁴MΩ/500V_DC

5.Voltage resistance strength：non-puncture, no arc-over under 3KV_DC/1min

6) Insertion loss: PC>40dB, UPC>50dB, APC>60dB

7) Connection life span: >1,000 times 

Dimension:
24 fibers: 310*310*88.5 mm
48fibers: 360*310*131 mm
If you have your own design or picture or drawing, we also accept do the OEM for you.